PRODUCT GALLERY
BOLTIGHT
Bolting Tools
1500 Bar System Hydraulic Bolt Tensioning Tools
MODEL / SKU
1500-bar-system-hydraulic-bolt-tensioning-tools
SURKON INTERNATIONAL
Request a quotation
Explore technical details
Select your quantity and add the item to your quote basket.
ENGINEERED FOR INDUSTRY
Technical details & documentation
Technical information, applications and supporting documents for 1500-bar-system-hydraulic-bolt-tensioning-tools.
- Bolt Tensioner Technical Data
| Model No | Bolt Diameter | Hex. Size |
Pitch | Capacity | Area | Stroke | A | B | C | Weight | |||
| Metric | Inch | mm | Size | Kgf / ton | kN | Lbf | cm2 | mm | mm | mm | mm | kg | |
| BT21 | M16 | 27 | 2 | 23 | 233 | 52.380 | 15,5 | 12 | 73 | 175 | 53 | 1,5 | |
| M20 | 3/4 | 30 | 2 | 53 | 2,3 | ||||||||
| M22 | 7/8 | 32 | 2,5 | 53 | 2,2 | ||||||||
| M24 | 1 | 36 | 3 | 62 | 2,2 | ||||||||
| M27 | 1- 1/8 | 41 | 3 | 62 | 2,1 | ||||||||
| BT22 | M27 | 1- 1/8 | 41 | 3 | 43 | 433 | 97.342 | 28,8 | 15 | 105 | 175 | 62 | 2,1 |
| M30 | 46 | 3,5 | 73 | 2,1 | |||||||||
| M33 | 1- 1/4 | 50 | 3,5 | 73 | 5,5 | ||||||||
| M36 | 1- 3/8 | 55 | 4 | 81 | 5,4 | ||||||||
| M39 | 1- 1/2 | 60 | 4 | 83 | 5,7 | ||||||||
| BT23 A | M39 | 1- 1/2 | 60 | 4 | 79 | 791 | 177.823 | 52,7 | 15 | 136 | 200 | 83 | 5,7 |
| M42 | 1- 5/8 | 65 | 4,5 | 93 | 9,5 | ||||||||
| M45 | 1- 3/4 | 70 | 4,5 | 96 | 9,2 | ||||||||
| M48 | 1- 7/8 | 75 | 5 | 101 | 10 | ||||||||
| M52 | 2 | 80 | 5 | 104 | 9,7 | ||||||||
| BT23 B | M42 | 1- 5/8 | 65 | 4,5 | 95 | 948 | 213,118 | 63,2 | 15 | 144 | 200 | 87 | 9,5 |
| M45 | 1 - 3/8 | 70 | 4,5 | 90 | 9,2 | ||||||||
| M48 | 1- 7/8 | 75 | 5 | 95 | 10 | ||||||||
| M52 | 2 | 80 | 5 | 98 | 9,7 | ||||||||
| BT23 C | M48 | 1- 7/8 | 75 | 5 | 105 | 1047 | 235.374 | 69,8 | 15 | 156 | 230 | 73 | 10 |
| M52 | 2 | 80 | 5 | 81 | 9,7 | ||||||||
| M56 | 2- 1/4 | 85 | 5,5 | 83 | 13 | ||||||||
| BT24 | M52 | 2 | 80 | 5 | 127 | 1,267 | 284.832 | 85 | 15 | 172 | 230 | 104 | 9,7 |
| M56 | 2 - 1/4 | 85 | 5,5 | 123 | 13 | ||||||||
| M64 | 2- 1/2 | 95 | 6 | 129 | 16,4 | ||||||||
| BT25 | M64 | 2 - 1/2 | 95 | 6 | 183 | 1,830 | 411.400 | 122 | 15 | 200 | 255 | 129 | 16,4 |
| M72 | 2 - 3/4 | 105 | 6 | 150 | 25,6 | ||||||||
| M76 | 3 | 110 | 6 | 154 | 24,8 | ||||||||
| BT26 | M76 | 3 | 110 | 6 | 250 | 2,502 | 562.471 | 166,8 | 15 | 235 | 288 | 154 | 24,8 |
| M80 | 3- 1/4 | 115 | 6 | 176 | 35,9 | ||||||||
| M90 | 3 - 1/2 | 130 | 6 | 185 | 36,3 | ||||||||
| BT27 | M90 | 3- 1/2 | 130 | 6 | 263 | 2,629 | 593.270 | 175,5 | 15 | 245 | 320 | 185 | 36,3 |
| M95 | 3- 3/4 | 140 | 6 | 191 | 42,3 | ||||||||
| M100 | 4 | 145 | 6 | 197 | 40,3 | ||||||||
- A hydraulic bolt tensioning tool provides a quick and easy method for tightening large diameter bolts to high and accurate pre-loads. Unlike conventional methods it does not use torque and does not require any forceful turning of the nut or bolt, like impact wrenches, flogging spanners or hydraulic torque wrenches. All of these methods have one common enemy, FRICTION. Overcoming thread friction and friction between the nut and the washer uses up over 80% of the torque energy applied to the nut or bolt, leaving less than 20% of the energy to produce useful tension in the shank of the bolt. Variations in this friction loss, from bolt to bolt causes non uniform tension in bolts that have been tightened to the same torque or impact wrench setting.
- A hydraulic bolt tensioner is an annular jack which fits over the bolt and nut to be tightened. The jack pushes against the bolted joint and pulls on the end of the bolt, which needs to be at least one diameter longer to accommodate the bolt tensioning tool. Because the force produced, by the jack, is applied directly to the end of the bolt, a tension equal to the load generated by the jack is developed in the shank of the bolt. With the jack applying the tension, it is possible to turn the nut with zero torque until it is tight. The load applied by the jack is then relaxed and a high percentage, depending on the length of the bolt and its diameter, is retained in the shank of the bolt.
- Bolt tensioning tools can be ganged together to enable multiple bolts to be tightened simultaneously, to the same high and accurate pre-load. This is particularly useful when compressing gaskets in pipeline or pressure vessel flanged connections. The high load developed by the multiple bolt tensioning tools, is evenly distributed around the joint causing the gasket to flow into the surface irregularities of the flange giving a much better seal.
- Flexible hoses with self sealing quick connect couplings are used to gang the bolt tensioning tools together to form a hydraulic ring main. The ring main and tensioning tools are normally pressurised using an air driven pump working from a compressed air supply.
- Maximum load available at working pressure 1500 bar
- Tools designed for optimum load/size ratio
- Smart size, high performance up to 2629 kN
- Tools are available in metrical and imperial size
- 9 different models from M16 up to M100, ¾” to 4”
- Single acting hydraulic system (vacuum retract system)
- Can be driven with hand, air or electric pumps
- Larger designs or special designs available on request
- Suitable for single or multi-tensioning applications









