Home SurkonTools Catalog External Control Pneumatic Torque Wrenches
NORBAR Pneumatic Torque Wrenches

External Control Pneumatic Torque Wrenches

MODEL / SKU PTM
SURKON INTERNATIONAL Request a quotation

Select your quantity and add the item to your quote basket.

Explore technical details
ENGINEERED FOR INDUSTRY

Technical details & documentation

Technical information, applications and supporting documents for PTM.

External-Control-Pneumatic-Torque-Wrenches-04The integration of electronic torque measurement and control into the PTM-72 Series is achieved with the minimum impact on overall tool size and weight.The actual applied torque is accurately measured at the output of the tool meaning that a repeatability of ± 2% can be guaranteed.

Shut-Off, External Control - this version of the PTM-72 incorporates a transducer , solenoid valve and three coloured LEDs for the indication of low, within tolerance or high results. However, all control functions and torque display are housed in an external controller unit (purchased separately). External controllers can give a m uch greater range of functionality than is possible on the ‘Internal Control’ version of the tool.

External-Control-Pneumatic-Torque-Wrenches-03

Model No Unit PTM52-500BEC PTM52-800BEC PTM72-1000BEC PTM72-1350BEC PTM72-2000BEC
Part No ** 18120.B06 18121.B06 18122.B06 18123.B08 18124.B08
Capacity (Min-Max) Nm 100-500 160-800 200-1000 270-1350 400-2000
Capacity (Min-Max) Lbf.ft 74-370 118-590 147-738 200-1000 295-1475
Square Drive inch 3/4" 3/4" 3/4" 1" 1"
Free Speed rpm 224 148 122 86 58
Bi-Directional Operate ** available available available available available
Tool Weight kg 4,9 4,9 7,4 7,4 7,8
Reaction Arm Weight
kg 0,85 0,85 0,7 0,7 0,7
Air Pressure (Max) bar 6,3 6,3 6,3 6,3 6,3
Air Consumption ltr/sec 19 19 19 19 19
Length ( A) mm 397 397 422 422 453

External-Control-Pneumatic-Torque-Wrenches-07PTM-72 tools use the same 'twin motor' handle as the PTM-52 but fitted with a durable 72mm gearbox to allow higher torque outputs. The 'twin motor' concept gives the benefit of high run-down speeds while adding very little to the size and weight of the tool. The integration of electronic torque measurement and control into the PTM-72 Series is achieved with the minimum impact on overall tool size and weight. The actual applied torque is accurately measured at the output of the tool meaning that a repeatability of +/-2% can be guaranteed. Shut-Off, External Control version of the PTM-72 incorporate a transducer, solenoid valve and three coloured LEDs for the indication of low, within tolerance or high results. However, all control functions and torque display are housed in an external controller unit (purchased separately).

  • Repeatable torque accuracy of ± 2%
  • 5 models from 500 to 2000 Nm
  • Torque control is performed by internal transducer
  • The torque value is set from an external control unit
  • Torque transactions are recorded, may be reported
  • Equipped with two air motors. Makes fast torquing
  • Automatic stop when the tool reaches the specified torque
  • Smooth, quiet operating noise of 85 dB (A) is below
  • Ideal for tight areas with 52 and 72mm diameter gear box
  • Smooth and soft torquing via reaction arm
  • Switches to tightening and removal directions with a button
  • Easy and controlled operation with specially designed trigger