Home SurkonTools Catalog Pneumatic Torque Wrench with Digital Display
NORBAR Pneumatic Torque Wrenches

Pneumatic Torque Wrench with Digital Display

MODEL / SKU PTM Series
SURKON INTERNATIONAL Request a quotation

Select your quantity and add the item to your quote basket.

Explore technical details
ENGINEERED FOR INDUSTRY

Technical details & documentation

Technical information, applications and supporting documents for PTM Series.

PTM Series_Sub Category Banner_07251412591481

PTM-72 tools use the same ‘twin motor’ handle as the PTM-52 but fitted with a durable 72mm gearbox to allow higher torque outputs. The ‘twin motor’ concept gives the benefit of high run-down speeds while adding very little to the size and weight of the tool.

  • norbar-ptm-series-pneumatic-torque-wrench-with-digital-display-01Fast - 1000 N.m version has a free speed of 122 rpm.
  • Light weight - 2000 N.m stall tool weighs just 6.2 kg.
  • Quiet - less than 85 db (A) when under load.
  • Non impacting - low vibration levels.
  • Square drive is quickly and easily replaceable.
  • On Bi-directional tools, the direction control knob is locked
    while the tool is running to prevent accidental damage to the gearbox.
  • ‘Soft Start’ trigger control aids socket location 
  • For safety, gearbox can rotate independently from the handle so that
    reaction forces are not transmitted back to the operator.
  • 1” square drive available for the 1000 N.m version, Part No. 18492.

norbar-ptm-series-pneumatic-torque-wrench-with-digital-display-03norbar-ptm-series-pneumatic-torque-wrench-with-digital-display-02norbar-ptm-series-pneumatic-torque-wrench-with-digital-display-04norbar-ptm-series-pneumatic-torque-wrench-with-digital-display-05

Model No Birim PTM52-500BIC PTM52-800BIC PTM72-1000BIC PTM72-1350BIC PTM72-2000BIC
Part No ** 18110.B06 18111.B06 18112.B06 18113.B08 18114.B08
Capacity (Min-Max) Nm 100-500 160-800 200-1000 270-1350 400-2000
Capacity (Min-Max) Lbf.ft 74-370 118-590 147-738 200-1000 295-1475
Square Drive
inch 3/4" 3/4" 3/4" 1" 1"
Free Speed rpm 224 148 122 86 58
Bi-directional Operation ** available available available available available
Tool Weight kg 4,9 4,9 7,4 7,4 7,8
Reaction Arm Weight kg 0,85 0,85 0,7 0,7 0,7
Air Pressure (Max) bar 6,3 6,3 6,3 6,3 6,3
Air Consumption ltr/sec 19 19 19 19 19
Tool Length (A) mm 397 397 422 422 453

 norbar-ptm-series-pneumatic-torque-wrench-with-digital-display-06norbar-ptm-series-pneumatic-torque-wrench-with-digital-display-07

The integration of electronic torque measurement and control into the PTM-72 Series is achieved with the minimum impact on overall tool size and weight. The actual applied torque is accurately measured at the output of the tool meaning that a repeatability of ±2% can be guaranteed.

Shut-Off, Internal Control - these tools include a torque transducer, easy to read LED display, control panel and a solenoid valve to shut off the air supply once the desired torque has been reached.The tolerance band within which the bolt must be tightened can be set on the tool handle control panel.When the tool is operated, the actual applied torque is displayed along with one of three coloured LEDs to indicate a low, within tolerance or high result.The tool can be operated in either N.m or lbf.ft.

 

norbar-pneutorque-applicationnorbar-pneutorque-led-screennorbar-pneutorque-delivery-content