Home Industrial Tools HAZET 7294-2 sTAC Electronic Torque & Angle Wrench | 40–400 N·m
HAZET Electronic Torque Wrench

HAZET 7294-2 sTAC Electronic Torque & Angle Wrench | 40–400 N·m

MODEL / SKU 7294-2 sTAC

Electronic torque and angle wrench for documented high-precision tightening. 40–400 N·m measuring range, Bluetooth 4.1 LE, USB-C, 3,000-measurement memory and replaceable 3/4″ ratchet insert.

AT A GLANCE
Part No. 6005CT-100
Torque Range 40–400 N·m
Torque Accuracy ±1% / ±1 digit
Angle Accuracy ±1% / ±1°
Insert Connection / Drive 14 × 18 mm / 3/4″ (6406)
Bluetooth Bluetooth 4.1 LE
USB Interface USB-C
Memory Up to 3,000 measurements
Length with / without Insert 1,021 / 945 mm
Approx. Weight with / without Insert 3.2 / 2.3 kg
Battery Rechargeable Li-ion 14650 / 3.7 V
Protection IP40
Origin Made in Germany
SURKON INTERNATIONAL Get a tailored quotation

Our technical sales team can help you select the right model, verify availability and prepare a quotation.

Explore technical details
ENGINEERED FOR INDUSTRY

Technical details & documentation

Technical information, applications and supporting documents for 7294-2 sTAC.

Technical Specifications

Part No. 6005CT-100
Torque Range 40–400 N·m
Square Drive 1/4″
Torque Accuracy ±1% / ±1 digit
Angle Accuracy ±1% / ±1°
Insert Connection / Drive 14 × 18 mm / 3/4″ (6406)
Bluetooth Bluetooth 4.1 LE
USB Interface USB-C
Memory Up to 3,000 measurements
Length with / without Insert 1,021 / 945 mm
Approx. Weight with / without Insert 3.2 / 2.3 kg
Battery Rechargeable Li-ion 14650 / 3.7 V
Protection IP40
Origin Made in Germany

What's Included

  • Electronic torque and angle wrench 7294-2 sTAC × 1
  • Insert reversible ratchet HAZET 6406, 3/4″ × 1
  • Rechargeable Li-ion battery 14650 / 3.7 V × 1
  • USB 3.1 A-C cable 1 m × 1
  • Carrying case × 1
  • Operating instructions × 1
  • Manufacturer examination certificate × 1

Optional accessories are not included unless expressly listed by the manufacturer.

Error Messages & Troubleshooting

Message / SymptomPossible CauseRecommended Action
System test not OK Warning Device started while loaded, or torque-sensor malfunction if it persists without load.Switch off and restart with the wrench supported on a stable surface and not under load. If the message persists, arrange HAZET service inspection. Source: HAZET 7000 sTAC manual, EN p.31
Overload error Critical Torque exceeded the wrench's permitted maximum.Immediately stop tightening. Follow the manufacturer's overload instructions and arrange technical inspection if necessary. Source: HAZET 7000 sTAC manual, EN p.32
Memory full Data loss warning All internal measurement slots are occupied.Read out and securely save measurement records before continuing. The manual warns subsequent measurements can overwrite existing memory. Source: HAZET 7000 sTAC manual, EN p.32

Stop using damaged or overloaded tools. Follow the manufacturer's manual and consult qualified service personnel where necessary.

Operation & Safety

For controlled torque and rotation-angle tightening in accordance with the HAZET user manual. The green signal indicates the target tolerance band; a continuous red overload signal requires immediate stoppage.

Select the correct target value, tolerance and effective length for the installed insert tool. Follow all manufacturer safety and calibration instructions.

Software & Connectivity

SmartTAC mobile app: free live display via Bluetooth 4.1 Low Energy. The 7000-2 sTAC range has Bluetooth; the 7000-5 sTAC range does not.

USB-C enables charging and connection to PC. HAZET 7910-sTAC programming and evaluation software is a separately priced option.

Maintenance & Calibration

The device's service display can appear after 5,000 loading cycles since calibration; arrange calibration according to the HAZET operating instructions.

Clean only as instructed by HAZET; qualified service personnel should carry out repair work. A manufacturer examination certificate is not automatically an accredited DAkkS calibration certificate.

Documents & Downloads